The University of Texas at Arlington's Division for Enterprise Development Public Works Institute's (PWI) mission is to serve as the leading provider of professional and technical training to a diverse set public works professionals, be they federal, state, or local government employees or private contractors. Training topics include Work Zone Safety, Heavy Equipment Operations, Water & Waste Water, Utility & Pipeline Locating, Regulatory Requirements, Infrastructure Design & Construction, Public Safety, First Responder Safety & Response, Environmental Controls, Project Management, Tree Care/Landscape Maintenance.
For additional information about specific training topics, please click on the links below.
Available to Texas local government at no cost.
This course is presented in Spanish. It is equivalent to the Flagger Training in English (CCT 300). It is intended for individuals who will be performing or engaging in flagging duties on construction/maintenance projects.
Schedule a class
This course is intended for individuals who will be performing or engaging in flagging duties on construction/maintenance projects.
Schedule a class
This course is designed to concentrate on activities which generate the highest level of accidents and injuries in road construction and maintenance work zones. It will help students recognize unsafe work practices and reduce or eliminate hazards from the work environment.
Schedule a class
This course is designed to help understand current practices in the application, installation, and operation of signs used on roads and streets.
Schedule a class
This is the primary course for all personnel involved in the design, layout, and maintenance of traffic control devices on public roadways.
Schedule a class
This course provides an update of basic changes included in the Revision 2, November 2011 edition of the Texas Manual of Uniform Traffic Control Devices (TMUTCD).
Schedule a class
This SHRP2 National Traffic National Traffic Incident Management Responder Training based course provides first responders with the knowledge needed to ensure a well-coordinated response to traffic incidents that achieves faster clearance and improves safety for both responders and motorists.
Schedule a class
This course aims to equip personnel involved in loading, securing, and transporting equipment on trailers and rollback trucks with the necessary knowledge to perform these tasks safely. The program includes both classroom instruction and a field exercise. The classroom training covers DOT regulations, load distribution, chains and tie-down hardware, tiedown calculations, and safe loading and transportation procedures. In the field segment, participants will inspect a trailer and hauling vehicle, as well as load and secure a piece of construction equipment using the appropriate hardware, chains, and tie-down points.
Upon successful course completion, participants will receive a certificate and card of completion from UTA's Public Works Institute.
This course is designed to serve as an introduction/overview of established traffic control guidelines for maintenance activities and other short-term operations. It is intended for field personnel responsible for the planning, selection, application, and operation of short-term work zones. It addresses the needs of a broad audience: maintenance crews, utility crews, construction personnel, state and local agency staff, and any individual who will work in or near a highway right-of-way. The course covers elements of temporary traffic control found within Chapter 6 of the Texas Manual on Uniform Traffic Control Devices (TMUTCD) such as components of a work zone and their respective requirements, proper application of devices, worker safety, and the use of typical applications most often utilized in short term operations.
Upon successful course completion, participants will receive a certificate of completion and a card that is valid for 4 years from UTA's Public Works Institute.
Upon successful course completion, participants will earn a digital badge with Credly.
Prerequisite Required
Prerequisite: Refresher class for those who have taken the full 16-hour Traffic Control Supervisor course. Prerequisite documents from the previous 4 years required.
Upon successful course completion, participants will receive a certificate of completion and a card that is valid for 4 years from UTA's Public Works Institute.
Prerequisite Required
This course is designed for Texas cities and counties interested in offering behind-the-wheel entry-level training to their staff. Successful completion of this course will equip participants with the necessary curriculum and tools to deliver behind-the-wheel driver's training to their employees.
Prerequisite: Attendees must possess a VALID Commercial Driver's License (CDL) for at least two years prior to the course start date.
Upon successful course completion, participants will receive a certificate of completion from UTA's Public Works Institute.
Upon successful course completion, participants will earn a digital badge with Credly.
This course is designed for Texas city and county personnel looking to obtain a Commercial Driver's License (CDL). The course covers all the knowledge based/ theoretical aspects required by the Federal Motor Carrier Safety Administration (FMCSA), with thorough testing and assessment. Participants must achieve a minimum score of 80% in this course to electronically confirm their completion of training, enabling them to proceed to the written state exam.
Upon successful course completion, participants will receive a certificate of completion from UTA's Public Works Institute.
Upon successful course completion, participants will earn a digital badge with Credly.
This program is supported through funds provided by The Federal Highway Administration (FHWA) and the Texas Department of Transportation (TxDOT). The Texas Local Technical Assistance Program (TxLTAP) is managed by the University of Texas Arlington's Public Works Institute.
Through training geared to local government circumstances, customized technical assistance, advice provided at events, and a library of resources, TxLTAP provides relevant and impactful information focused on road and bridge/culvert maintenance, the use of traffic control devices and other techniques to promote traffic safety.
For more information please visit the TxLTAP website.
The safety of the public and your work zone crews is the top priority. Learn how to set up and operate flagging stations that are both safe and effective. This training combines lectures, demonstrations, video presentations, and hands-on skill practice. Individuals interested in receiving training as an escort flagger in accordance with Texas law and Chapter 22 of the Basic Peace Officer Course can take this class to meet the new regulatory obligations.
View available courses
This course was established to certify individuals to teach “Qualified Flagger” training, as specified by Texas Department of Transportation 2014 Standard Specification Items 7 and 502. After successful completion of this course, including physical demonstrations and teach-backs demonstrating teaching skills, the student will be equipped to train “qualified flaggers”. Individuals interested in receiving training or training others as an escort flagger in accordance with Texas law and Chapter 22 of the Basic Peace Officer Course can take this class to meet the new regulatory obligations.
View available courses
The University of Texas at Arlington offers heavy equipment operator training for earthmoving, hoisting, and material handling equipment. The training programs cover: safety, preventive maintenance, inspections, applicable OSHA standards, and safe, correct operating techniques. The training is conducted at the client’s site using the client's equipment.
View available courses
The University of Texas at Arlington offers crane, rigging and crane operator qualification training programs. Instruction is delivered through a blended approach which includes classroom instruction and in-the-seat operation of the equipment. Topics cover: safety, preventive maintenance, inspections, applicable OSHA standards, and safe, correct operating techniques.
View available courses
The University of Texas at Arlington offers a third party evaluation of an organization’s experienced heavy equipment operators. The assessments involve a series of operator qualification tests relevant to a specific piece of equipment to verify and document operator competency.
View additional details
This course is designed to serve as an introduction/overview of established traffic control guidelines for maintenance/construction activities and other short-term operations. Course meets TxDOT's Special Provision to Item 7 training standard for "Other Work Zone Personnel".
View available classes
This course is geared to those who supervise traffic control technicians and other personnel in roadway work zones. Course meets TxDOT's Special Provision to Item 7 training standard for "Contractor Responsible Person and Alternate".
View available classes
This 8-hour course is only for those who have taken the 16-hour Traffic Control Supervisor course in the previous 3-year cycle. The course meets the TxDOT Special Provision to Item 7 standard for Refresher Course for Contractor Responsible Person and Alternate.
View available classes
This is the primary course for all personnel involved in the design, layout, and maintenance of traffic control devices on public roadways. Participants who successfully complete this course will be issued a Qualified Flagger card valid for 3 years.
View available classes
This course is designed to meet the training requirements of the OSHA Standard for confined space entry for entrants, attendants, and entry-supervisors. It is intended to provide participants who might be exposed to confined space hazards with the ability to recognize and minimize such hazards.
View available classes
This course is designed to meet the Competent Person training requirement of the OSHA Standard for Excavations. It is intended to provide those who work in or around excavations and might be exposed to excavation hazards with the ability to recognize and minimize such hazards.
View available classes
This course is designed to meet the Competent Person training requirement of the OSHA Standard for falls. This course is intended to provide those who work at elevation and are exposed to fall hazards with the ability to recognize and minimize such hazards.
View available classes
This course is intended to provide participants with the ability to identify, evaluate, and prevent hazards associated with tree trimming operations, and the use of chippers and chainsaws.
View available classes
This course is intended to provide participants who might be exposed to electrical hazards (such as electric shock, electrocution, fires, and explosions) with the ability to recognize and minimize such hazards.
View available classes
This course is designed to introduce the student to the basic components of an electrical circuit, the potential hazards, and how to recognize and avoid such hazards. This course will introduce various portions of NFPA, Vol. 70E covering electrical hazards and personal protective equipment (PPE).
View available classes
This course is specifically designed to cover all aspects of the electrical installation. Blending the TxDOT specification, electrical details, construction plans and the National Electrical Code in a manner best aligned with the installation process encountered in the field enhances learning and retention of course material. A certification test is administered at the end of the class. Those attendees receiving a certification card will be placed on a state wide list. This course is required for contractor's wishing to bid on state projects. Inspectors are required to check for certification of employees in the field.
View available classes
This information packed training addresses both the art and science behind underground utility line locating and marking, as well as, state laws, standards, and regulations. The course provides a balanced mixture of classroom training combined with hands-on field instruction performed outdoors. Participants gain an A-Z understanding of the fundamentals of line locating. Special emphasis is placed on mastery of the electronic detection equipment and troubleshooting techniques to solve utility locating puzzles.
View available classes
This 2 day course offers participants a chance take their art and skills to the next level. Students will enjoy plenty of hands on training time spent outdoors utilizing an assorted array of locating devices and methods. Pick up a few tips for creating and deploying a site locating plan along with advanced troubleshooting techniques utilizing both equipment and deductive reasoning skills to identify, overcome and even prevent certain types of line locating errors.
View available classes
This training is designed for gathering, transmission, and distribution pipeline system employees responsible for design, construction, maintenance, and construction of the pipeline system. This is a customized training event designed to address pipeline specific issues, locating challenges, and best practices for damage prevention. Round table discussions are part of this well received course.
View available classes
This basic training is designed for pipeline system employees responsible for design, construction, and maintenance of the pipeline system. The course will address pipeline specific issues and regulatory requirements, locating challenges as well as best practices for damage prevention. Accurate locating techniques and safe excavation practices are the fixtures of this training. Recommended for pipeline employees and contractors with little or no experience in the pipeline industry.
View available classes
This series of online courses is to extend your electrical certification in order to continue your work on Texas Department of Transportation (TxDOT) projects. The TRF450 is a required prerequisite.
Each online training module is $100 and must be paid by credit card (Visa, MasterCard, Discover or American Express). No refunds are permitted.
Upon successful completion of a minimum of three (3) modules of your choosing, a wallet card will be mailed from the University of Texas Arlington (UTA). The expiration date of this wallet card will be 3 years from the expiration date of your current card issued by UTA.
View available courses
WHO IS ELIGIBLE TO ATTEND?
Certain classes are open to TxDOT retirees, consultants, contractors, government employees and employees of other publicly funded organizations (i.e. Traffic Safety, Public Transportation and Metropolitan Planning Organizations)
For more information please visit the TxDOT website.
DO NOT ATTEND CLASS UNLESS YOU HAVE RECEIVED A CONFIRMATION EMAIL
View available courses
These online courses are relevant to contractors performing work under the TxDOT Environmental Management System.
Each online training module is $75 and must be paid by credit card (Visa, MasterCard, Discover or American Express). No refunds are permitted.
Upon successful completion of a module, you will be able to download and print a certificate of completion.
View available courses
The University of Texas at Arlington, Division for Enterprise Development is offering custom training specialized for the Heavy Highway Construction Industry. Basic, Intermediate, and Operator Qualification Heavy Equipment Operator Training is available. This program combines classroom training with field experience. UTA will provide the curriculum and the instructors, and you can provide the classroom and the equipment. Or if you need a complete package, we can provide everything. Imagine quality, intensive training for your teams, to get them the technical expertise to do the job right!
Contact Judy Willingham at 817-272-9632 or at jwillingham@uta.edu today for more information.
PHYSICAL ADDRESS:
140 W. MITCHELL
ARLINGTON, TX 76010
PHONE: (817) 272-2581
TOLL FREE: 1-866-906-9190
FAX: (817) 272-2556
EMAIL: CEDQUESTIONS@UTA.EDU
MAILING ADDRESS:
DIVISION FOR ENTERPRISE DEVELOPMENT
BOX 19197
ARLINGTON, TX 76019
OFFICE HOURS:
MONDAY - THURSDAY: 8AM - 5:30PM
FRIDAY: 8AM - 5PM
SATURDAY/SUNDAY: CLOSED
GSA Pricing and streamlined purchasing for open enrollment and
custom contract training now available to federal government customers.
Legal & Privacy
Site Policies
Site Map
© University of Texas at Arlington
